Just like your clothing, your washer and dryer are things that require periodic cleaning, though not that often. As time passes, washing machines collect dirt residue that might lead to mold, and dryers collect lint that can start a fire. So clean your washer and drier regularly to keep them safe and fresh.
How to Clean Your Washing Machine
- Run a bicycle using baking soda. Add two cups of baking soda to the washing machine. This will combat moldy smells that old soap and fabric softeners leave behind.
- Run a different cycle with vinegar. To further eliminate musty odors, as well as soap and cloth deposits, pour two cups of white vinegar right into the machine drum and operate the hottest and longest cycle. To get extra freshness, then add 10 drops of essential oil, like tea tree or lavender into the mix. Remove any stains utilizing a paste of baking soda and warm water and a soft sponge.
- Wash the rubber seal attached to the washer if you have a front-load washer. It usually hosts mold that’s bad for your health and your own clothes. Clean it with a cotton cloth dipped in white vinegar along with your favorite all-purpose cleaner.
- Clean the exterior machine parts. Now it’s time to provide your washer, the outside surfaces, as well as the detergent packs a good clean. If dispensers are removable, then take them out. Use vinegar or your preferred cleaner and cotton fabric. If you have a top-load washer, clean the surface of the lid and beneath it. For cracks and cracks, use a shampoo and baking soda if necessary.
How To Wash Your Dryer
- Clean the lint filter/trap. First, remove the filter and then vacuum it out (depending on the dryer, you might want to unscrew the filter first). Then, clean the lint that has built up in the filter trap employing a thin wand attachment on your vacuum cleaner.
- Vacuum the dust in the rear panel. Before you do this, make sure to read the manufacturer’s instructions. Once you’re sure it’s safe to clean out the rear panel, then unscrew the bolts and you’re going to see a ton of lint inside. Vacuum the lint out and utilize a brush to get inside hard locations. Wash the interior drum and the dryer door thoroughly with a sponge and a cleaner, and allow it to dry.
- Vacuum the duct. First, detach the bronchial duct in the rear of the drier carefully and use your vacuum to remove the lint and dust within the duct. You also want to check the outside exhaust tube to ensure there is not any lint blocking the port. Eliminate the valve and vacuum cleaner the lint if there is any.
- Wipe the drier. Now it’s finally time to clean the exterior surfaces of the drier with warm water and an all-purpose cleaner. Once this is completed, reattach the rear panel and ducts.
Clean your washing machine and drier regularly to make them last longer, better protect your laundry, and avoid hazards, such as mold increase in the washer, washing machine overflows, and dryer fires.
Contact Your Regional PuroClean Office To Get Disaster Restoration Services
For water removal solutions, flood cleanup, and fire damage restoration solutions, contact your regional PuroClean Woodinville office. Our trained technicians use state-of-the-art equipment and methods to mitigate your house harm.
